|
|
| |
 |
STERIS
> Steam Sterilizers
> Washing Equipment - Laboratory
> Washing Equipment - Pharmaceutical
Grade
> Biodecontamination Products
> High Purity Water Systems
> Pure Steam Generators
> Sterility Assurance
| Steam
Sterilizers |
| |
Amsco®
Century® Small Steam Sterilizer
The Century Sterilizer meets the needs of today-s
O.R. and other areas of the hospital. The Century
features footpedal operation of the automatic sliding
door for hands-free loading and unloading. The vacuum
fluorescent touch panel permits direct operator
cycle selection. The large display of time remaining
during the cycle allows the operator to perform
other tasks while awaiting cycle completion. |
| |
Amsco® Century® Medium Steam Sterilizers
26 x 26
This sterilizer is offered in a prevacuum configuration
and is designed for fast, efficient sterilization
of heat- and moisture-stable materials in scientific
applications. Prevacuum configuration sterilizers
are equipped with prevacuum, gravity, liquid, leak
test, and daily air removal (Bowie-Dick) test cycles.
All configurations include choice of a single or
double door. |
| |
Amsco® Century®
Medium Steam Sterilizers 26 x 37.5
This sterilizer is offered in a Prevacuum configuration
and is designed for fast, efficient sterilization
of heat- and moisture-stable materials in scientific
applications. Prevacuum configuration sterilizers
are equipped with prevacuum, gravity, liquid, leak
test, and daily air removal (Bowie-Dick) test cycles.
|
| |
Finn-Aqua® Steam Sterilizer
Finn-Aqua GMP Steam Sterilizers provide shortened
validation, increased reliability, and flexibility.
Each sterilizer is available with all the standard
sterilization processes that utilize steam as the
sterilizing agent, including saturated steam, steam-air
mix and water-air mix. Customized cycles can also
be developed, based on customer-specified requirements. |
|
Finn-Aqua® BIO Pharma Series (BPS)
GMP Steam Sterilizers
The Finn-Aqua BPS sterilizers are available with
multiple chamber sizes with a choice of various
sterilization processes. These sterilizers will
satisfy the most basic needs and the specialized
requirements of any biotech or biopharmaceutical
application. |
| Note:
Products listed are subject to change without notice
and availability may vary from country to country. |
| |
|
| Washing
Equipment - Laboratory |
|
|
Hamo®
T-21 Glassware Washer
T-21: 640 x 640 x 640 mm ( 25¼ x 25¼
x 25¼ inches)
and 640 x 1000 x 640 mm ( 25¼ x 39¼
x 25¼ inches) (WxHxD)
The economical system for cleaning and drying of
laboratory glassware. |
|
|
Hamo® T-420 Glassware Washer
1290 x 700 x 800 mm (50¾ x 27½ x 31½
inches) and
1290 x 1000 x 800 mm (50¾ x 39¼ x
31½ inches) (WxHxD)
The economical system for cleaning and drying of
laboratory items. |
|
|
Reliance® 200 and
250 Glassware Washers
The Reliance 200 and 250 Glassware Washers are high-quality,
high performance systems specifically designed and
validated for research-intensive laboratory settings.
As point-of-use systems, these washers offer automated
cleaning and drying of typical laboratory glassware,
as well as miscellaneous plastic items used in universities,
biotech, biopharmaceutical, and pharmaceutical analytical
and quality control laboratories. |
|
|
Reliance® 400 Laboratory Glassware
Washer
The Reliance 400 Laboratory Glassware Washer is
manufactured in a production facility that is ISO
13485 certified, are designed for high-capacity,
efficient cleaning of laboratory glassware. From
our first washing and drying systems produced more
than 30 years ago to today's Model 400 glassware
washer, performance has always been superior. |
|
|
Reliance® 500 Laboratory
Glassware Washer
The Reliance 500 Laboratory Glassware Washer is
manufactured in a production facility that is ISO
13485 certified, are designed for high-capacity,
efficient cleaning of laboratory glassware. From
our first washing and drying systems produced more
than 30 years ago to today's Model 500 glassware
washer, performance has always been superior. |
| Note:
Products listed are subject to change without notice
and availability may vary from country to country. |
| |
|
| Washing
Equipment - Pharmaceutical Grade |
| |
Hamo®
T-21 Pharmaceutical Grade Washer
Wash chamber:
T-21:640 x 640 x 640 mm (25¼ x 25¼
x 25¼ inches)
and 640 x 1000 x 640 mm (25¼ x 39¼
x 25¼ inches) (WxHxD)
The economical system for cleaning and drying. Validated
cleaning for development (GLP) and production (GMP) |
| |
Hamo® T-420 Pharmaceutical Grade Washer
Wash chambers:
T-420: 1290 x 700 x 800 mm (50¾ x 27½
x 31½ inches) and
1290 x 1000 x 800 mm (50¾ x 39¼ x
31½ inches) (WxHxD)
The economical system for cleaning and drying.
Validated cleaning for development (GLP) and production
(GMP) |
| |
Hamo® T-BCC Pharmaceutical
Grade Washer
One-Chamber or Multi-Chamber Cleaning Systems for
Bulk Containers.
Wash chamber:
1200-1500 x 1500-2500 x 1200-1500 mm
(47¼-59 x 59-98½ x 47¼-59 inches)
(WxHxD) |
| Note:
Products listed are subject to change without notice
and availability may vary from country to country. |
| |
|
| Biodecontamination
Products |
| |
VHP®
1000ED Biodecontamination System
The standard in low temperature biodecontamination
that you've depended on for the past ten years is
now even more efficient. VHP 1000ED offers extended
duty to maximize production efficiency and enhanced
design for improved, more robust operation. |
| |
VHP® 100P Biodecontamination System
The proven technology of VHP low temperature sterilization
is now available for small enclosures of 2 to 70
cubic feet (0.05 to 2 cubic meters) including small
isolators, biological safety cabinets, glove boxes,
CO2 incubators and small pass-through chambers. |
| |
Chemdi® VHP Chemical
Indicator
The Chemdi VHP Chemical Indicators consist of a
short, laminated paper strip printed on one end
with a yellow indicator ink that is responsive to
hydrogen peroxide vapor. Once exposed for an appropriate
period of time to hydrogen peroxide vapor, the yellow
indicator ink changes to a violet/grey color. |
| |
VHP® Validation Products
VHP Spordex® Polyflex Biological Indicators
are plastic disks containing E5 Geobacillus stearothermophilus.
Each disk is individually wrapped in a Mylar®/Tyvek®
pouch for proper exposure and easy handling. |
| |
Vaprox® Hydrogen
Peroxide Sterilant
Use of inferior grades of hydrogen peroxide solution
or solutions of concentrations higher than 35% may
invalidate the injection system warranty. Additionally,
some inferior grades of peroxide may deposit a residue
in the injection system, requiring maintenance prior
to resuming operation. |
|
|
STERIS CED™ Continuous Effluent
Decontamination System
Designed to replace kill tanks, the innovative CED
System is the newest hazardous fluid decontamination
technology in decades. The system provides safe,
validatable, continuous effluent flow decontamination
for BL-3 and BL-4 labs, biological containment facilities,
and animal production and comparative medicine facilities.
It includes built-in diagnostic control, redundant
processing systems, and independent safety zones,
and was developed using the highest engineering,
manufacturing and validation standards. Options
include choices of cabinet size, flow volume capacity,
buffer tank size, configuration combinations, and
accessories such as effluent receiving grinders,
alternate control panel mounts, magnetic coupled
mixing systems, and a Clean in Place (CIP) cleaning
package. |
| Note:
Products listed are subject to change without notice
and availability may vary from country to country. |
| |
|
| High
Purity Water Systems |
| |
Finn-Aqua®
Multiple-Effect Water Still
Finn-Aqua Multiple-Effect Water Stills represent
the most reliable technology available today for
the production of pure, pyrogen-free water-for-injection
(WFI). This unique design combines the multiple-effect
distillation process with compact sanitary columns
that maximize heat utilization and consistently
produce high-quality distillate at low cost. |
| |
Finn-Aqua® T-Series Multiple-Effect
Water Still
The new T-Series Multiple-Effect Water Still takes
the unique Finn-Aqua falling-film evaporation technology
yet one step further with a new patented column
construction and and enhanced process and design
to deliver even better performance, energy efficiency
and dependability. |
| Note:
Products listed are subject to change without notice
and availability may vary from country to country. |
| |
|
| Pure
Steam Generators |
|
|
Finn-Aqua®
Pure Steam Generator
Finn-Aqua Pure Steam Generators represent the most
reliable technology available today for the production
of pure, pyrogen-free steam. Constructed with the
same unique design as the first column of our multiple-effect
water stills, these generators consistently produce
steam so pure that, when condensed, it exceeds the
requirements of USP XXIII for Water-For-Injection
(WFI). |
|
|
Finn-Aqua® T-Series Pure Steam Generator
The next generation Finn-Aqua Pure Steam Generator
(PSG) offers the pharmaceutical industry unique
features to enhance pure steam quality, reliability,
safety and cost-effectiveness. |
| Note:
Products listed are subject to change without notice
and availability may vary from country to country. |
| |
|
| Sterility
Assurance |
|
|
Verify®
Self-Contained Biological Indicators (SCBIs)
The Verify Self-Contained Biological Indicator System
is designed to monitor steam and/or ethylene oxide
(EO) sterilization processes. Each Verify Indicator
consists of a plastic cap and vial containing a
disc carrying Geobacillus stearothermophilus and
Bacillus atrophaeus spores and an ampule of bacterial
culture medium combined with a pH indicator. |
|
Spordex® Culture Media
Spordex Culture Media has been developed to be used
with STERIS Spordex and Spordi Biological Indicator
Strips and discs. Spordex Culture Media consists
of a modified soybean casein digest broth which
contains a pH indicator. An easy-to-read color change
in the medium from red to yellow is indicative of
microbial growth. |
|
|
Spordex® Strips
and Discs
Spordex Strips and Discs are specifically designed
for determining the effectiveness of steam, ethylene
oxide (EO), dry heat, or Vaporized Hydrogen Peroxide
(VHP®) sterilization procedures. Each strip
and disc is produced from a specially filter paper
inoculated with bacterial spores. |
|
|
Dart® & Bowie Dick
The Dart (Daily Air Removal Test) and Bowie Dick
Test Card both provide an easy yet extremely accurate
way to test for air leaks in pre-vacuum steam sterilizers.
They are compact, preassembled, and ready-to-use.
Both the Dart and Bowie Dick Test Card may be logged
in a record book to ensure consistent sterilizer
operation and maintenance. |
|
|
Steam Tape® and
Gas Tape® Process Indicator Tapes
Steam and Gas Process Indicator Tapes are available
for use in wrapping packs for steam and ethylene
oxide. The tape surface can be written on with indelible
ink without smearing or bleeding. The chemical indicator
lines show a strong, sharp color change after processing. |
|
|
Steraffirm™ Bowie Dick Test Packs
The Steraffirm Bowie Dick Test packs are pre-assembled
single-use test packs designed to evaluate the performance
of the air removal system of a pre-vacuum equipped
sterilizer. Several versions of these test packs
are available. |
|
|
Steraffirm™ Control
Tubes for Steam and Dry Heat
Each Steraffirm Sterilizer Control Tube consists
of a 45mm x 5mm borosilicate glass tube sealed at
both ends. One end is color coded to facilitate
identification of the unboxed indicator. |
|
|
Steraffirm™ Steam Class 6 Emulating
Indicators
The Steraffirm Steam Class 6 Emulating Indicators
are cycle verification indicators that confirm the
presence or absence of specific time and temperature
parameters during a cycle, and integrate all the
critical parameters of the steam sterilization cycle
(temperature, saturated steam and exposure time). |
|
|
Verify® and Chemdi®
Chemical Indicators
Chemical Indicators are designed to monitor the
achievement of sterilization cycle parameters for
steam, ethylene oxide (EO), and dry heat sterilization.
Both products offer short and long strips for placement
inside packaged product. The Verify Dual Chemical
Integrator can be used for both steam and gas sterilization
processes. It is a biologically correlated chemical
integrator that ensures the highest level of sterility
assurance available from a chemical indicator. |
|
|
CIP 100® Formulated Alkaline Cleaner
A high performance phosphate-free liquid alkaline
detergent system for use in manual, immersion, and
recirculating spray equipment including Clean-In-Place
systems. It is effective in hard water and efficiently
removes a wide variety of soils typically found
in pharmaceutical, biotechnology, cosmetic, and
food and beverage processes. This product is designed
to be extremely free-rinsing. USDA listed under
Category A1. |
|
|
CIP 200® Formulated Acid Cleaner
A high performance liquid phosphoric acid cleaner
for use in manual, recirculating spray, and immersion
cleaning systems, including Clean-In-Place systems.
The blended acid and surfactant system rapidly and
efficiently removes a wide variety of scales, particulate,
and inorganic soils commonly found in pharmaceutical,
biotechnology, cosmetic, and food and beverage processes.
USDA listed under Category A3. |
|
CIP 300® Neutral pH Process and Research
Cleaner
CIP 300 Neutral pH Cleaner is phosphate free and
can be used as a stand alone detergent or detergent
additive. It serves the pharmaceutical, biotechnology
cosmetic, nutraceutical, and other industries requiring
effective, validatable cleaning. This low-foaming
product is ideal for use in recirculating wash systems
and is safe for use in manual applications. CIP
300 Cleaner is compatible across a wide array of
substrates including aluminum, brass, and other
soft metals. An extensive validation support package
is available to meet your analytical objectives.
|
|
|
Spor-Klenz® Ready-to-Use
A fast acting, liquid cold sterilant/disinfectant,
filtered to 0.22 micron and specifically formulated
for use in the sterilization and disinfection of
hard surfaces. This product is a stabilized blend
of peracetic acid, hydrogen peroxide, and acetic
that provides fast, effective microbial control,
including spores. It offers a low toxicity profile
and requires no mixing or activation. Each case
is accompanied by Certificates of Analysis, Filtration,
and Sterility |
|
|
Vesphene® IIse Phenolic Disinfectant
The Vesphene formula is a one-step, alkaline phenolic
cleaner/disinfectant made specifically for use on
hard non-porous surfaces. The Vesphene family of
products are all made with the same alkaline phenolic
formulation, but are processed and packaged differently
for specific applications. At a use-dilution rate
of 1:128, Vesphene products kill a broad spectrum
of common bacteria without harming the surface.
Formulated to maintain an alkaline use-dilution
pH of 10.4-10.6, they are ideal for use in a disinfectant
rotation program with the LpH® acidic family
of products. |
|
|
Septihol® Sterile Alcohol Solution
A ready-to-use, 70% USP grade, sterile isopropyl
alcohol solution that has been filtered to 0.22
micron and gamma irradiated for sterility. The bottle
is ergonomically designed with the adjustable trigger
sprayer attached and with a label that has been
molded into the bottle. The double bag material
contains an easy tear feature on both bags that
allows easy access to the product while providing
a sterile barrier. Each case is accompanied by Certificates
of Analysis, Filtration, Irradiation, and Sterility.
This product is ideal for the removal of cleanroom
process residues and for routine glove decontamination. |
| Note:
Products listed are subject to change without notice
and availability may vary from country to country. |
| |
|
|
|
|
|
| |
|
